JR Voyager 50 , OS 50SX-H , JR490T Gyro with High Speed JR8700G
Posted By: RICHARD DRAPER
Expires 24-Feb-2020 06:07:37 PM
Advert ID 89120
Exceptionally Rare Original JR MacGregor Display Helicopter .
Designed and Produced in Japan and still has a very good spares availability .
Complete with OS 50 SX-H and Performance Pipe .
JR 490T Heading Hold Gyro with JR 8700G High Speed Tail Servo .
High Torque Dual BB JR Servos on Cyclic .
JR 60cm Glass Fibre Blades .
Unique Glass Fibre Metallic Flake Finish Canopy which does have a chip on the nose (which could be covered with a suitable decal or moulding if needed) but no other damage .
Large number of K&S Upgrades Including ;
Heavy Duty Skid Set ,
Header Tank ,
Alloy Flybar Control Hoop ,
Lightened Flybar Paddles ,
Stainless Flybar ,
Carbon Boom Supports ,
Tail Blades and Fins .
All servo Wires are Braided for neatness and protection from scuffing .
The Helicopter itself has no damage or repairs at all . Very clean well looked after in perfect flying order and only requiring Battery and Receiver to get airborne , (all servo leads will be labeled ) . Receiver ,Twin Batteries and Heavy Duty Switch Harnesses are not included . Starts ,Runs and Idles perfectly and all Electronics/Gyro operate as they should .
I have a New Boxed JR Glass Fibre Canopy which cost me over £60 for an extra £25 if required.
I have also purchased a number of New in Packet JR Voyager Spares over the Years including a Complete Frame Set ,Clutch Bell with Complete Clutch Assembly, K&S Washout Assembly, K&S Upgraded Rear Tail Drive Gear, Tail Rotor Spindle and Anti Rotation Pitch Link which can be purchased separately if required.
Needles are set up for 12% Nitro which gives plenty of power with the Pipe .
Only reason for sale is due to thinning out some of my smaller Helis .
Currently in Powys Wales but can be available for collection in Watford Hertfordshire or Aldershot .
Any questions please call 07768 772902 .
To contact the advertiser click on "Ask Question" or use the other details below if provided. Ask Question is only available to registered members